Brother HL-L9300CDW - 10.2 LT Cover Rear

3-114
Confidential
10.2 LT Cover Rear
(1) Remove the two Taptite cup S M3x10 SR screws from the LT cover rear.
Fig. 3-156
(2) Release the two Pins and remove the LT cover rear from the Main body.
Fig. 3-157
LT cover rear
Taptite cup S M3x10 SR
Taptite cup S M3x10 SR
<Back side>
Pin
Pin
LT cover rear
2a
2b
Main body
<Back side>