Brother HL-L9300CDW - 8. IF YOU REPLACE THE LASER UNIT; 8.1 Continuous Adjustments of Density and Registration Sensor (Function code 73); 8.2 Counter Reset of Laser Unit (Reset Counters for Parts (Function code 88))

4-15
Confidential
8. IF YOU REPLACE THE LASER UNIT
■ What to do after replacement
- Continuous Adjustments of Density and Registration Sensor (Function code 73)
- Counter Reset of Laser Unit (Reset Counters for Parts (Function code 88))
8.1 Continuous Adjustments of Density and Registration
Sensor (Function code 73)
Perform continuous adjustments of density and registration sensor in accordance with “1.3.22
Continuous adjustments of density and registration sensor (Function code 73)” in Chapter 5.
8.2 Counter Reset of Laser Unit
(Reset Counters for Parts (Function code 88))
Perform counter reset of the laser unit in accordance with “1.3.29 Reset counters for parts
(Function code 88)” in Chapter 5.