5-35
Confidential
1.3.16 Continuous print test (Function code 67)
<Function>
This function is used to conduct paper feed and eject tests while printing patterns.
<Operating procedure>
Model without touch panel Model with touch panel
(1) Press the or key to display
“MAINTENANCE 67” on the LCD in the
initial state of the maintenance mode.
Then, press the OK key. “SELECT: K
100%” is displayed on the LCD.
(2) Referring to the <Print pattern> table,
press the or key to select the
desired print pattern and press the OK
key. “SELECT: A4” is displayed on the
LCD.
(3) Referring to the <Paper size> table,
press the or key to select the
desired paper size and press the OK
key. “SELECT: PLAIN” is displayed on
the LCD.
(4) Referring to the <Print specifications>
table, press the or key to select
the desired media specifications and
press the OK key. “SELECT: TRAY1
SX” is displayed on the LCD.
(5) Referring to the <Print type> table,
press the or key to select the
desired print type and press the OK
key. “SELECT: 1PAGE” is displayed on
the LCD.
(6) Referring to the <Number of pages to
be printed> table, press the or
key to select the desired number of
pages to be printed and press the OK
key. For the intermittent pattern printing
only, “SELECT: 1P/JOB” is displayed on
the LCD. For other than intermittent
pattern printing, go to step (8).
(7) Referring to the <Number of pages per
job> (Intermittent pattern printing only)
table, press the or key to select
the desired number of pages per job
and press the OK key.
(8) “PAPER FEED TEST” is displayed on
the LCD and the test pattern starts to
be printed under the selected items for
paper feed test.
(9) If you press the Cancel key, printing of
test pattern is interrupted and the
machine returns to the initial state of
the maintenance mode.
(1) Press the 6 and 7 keys in this order in
the initial state of the maintenance
mode. “SELECT: K 100%” is displayed
on the LCD.
(2) Referring to the <Print pattern> table,
press the or key to select the
desired print pattern and press the SET
key. “SELECT: A4” is displayed on the
LCD.
(3) Referring to the <Paper size> table,
press the or key to select the
desired paper size and press the SET
key. “SELECT: PLAIN” is displayed on
the LCD.
(4) Referring to the <Print specifications>
table, press the or key to select
the desired media specifications and
press the SET key. “SELECT: TRAY1
SX” is displayed on the LCD.
(5) Referring to the <Print type> table,
press the or key to select the
desired print type and press the SET
key. “SELECT: 1PAGE” is displayed on
the LCD.
(6) Referring to the <Number of pages to
be printed>
table, press the or
key to select the desired number of
pages to be printed and press the SET
key. For the intermittent pattern printing
only, “SELECT: 1P/JOB” is displayed on
the LCD. For other than intermittent
pattern printing, go to step (8).
(7) Referring to the <Number of pages per
job> (Intermittent pattern printing only)
table, press the or key to select
the desired number of pages per job
and press the SET key.
(8) “PAPER FEED TEST” is displayed on
the LCD and the test pattern starts to
be printed under the selected items for
paper feed test.
(9) If you press the X key, printing of test
pattern is interrupted and the machine
returns to the initial state of the
maintenance mode.
To Next Page
Loading...
