Brother HL-L9300CDW - 9.37 Paper Feed Unit;Joint Pin

3-100
Confidential
9.37 Paper Feed Unit/Joint Pin
(1) Push the T1 lift arm to the back and remove “B” of the Roller holder ASSY from “A” of the
T1 lift arm.
Fig. 3-133
(2) Slide the Roller holder ASSY in the direction of the arrow and remove it from the T1 drive
shaft gear Z17M07.
(3) Slide the Roller holder ASSY in the direction of the arrow 3a and 3b in this order and
remove it from the Paper feed unit.
Fig. 3-134
T1 lift arm
Roller holder ASSY
“A”
“B”
<Front side>
Roller holder ASSY
Paper feed unit
3b
3a
2
T1 drive shaft gear Z17M07