Brother HL-L9300CDW - 10.5 LT Relay PCB ASSY

3-117
Confidential
10.5 LT Relay PCB ASSY
(1) Disconnect all the Connectors from the LT relay PCB ASSY.
Fig. 3-162
(2) Remove the Taptite cup S M3x6 SR screw and remove the LT relay PCB ASSY from the
LT frame L unit.
Fig. 3-163
(Not used)
(LT paper
(LT plate-up
(LT connector)
(LT plate-up motor)
(LT solenoid)
edge sensor)
detection sensor)
LT relay PCB ASSY
2a
2b
LT relay PCB ASSY
Taptite cup S M3x6 SR
LT frame L unit
<Left side>