3-84
Confidential
Fig. 3-104
(3) Release the wiring of the Paper eject origin sensor.
(4) Release the two Hooks and remove the Paper eject origin sensor from the Paper eject
ASSY.
Fig. 3-105
Harness routing: Refer to “ Paper Eject ASSY”
Assembling Note:
After assembling the Eject ground wire 1 and Eject ground wire 2, check the
conduction between the Middle roller shaft and the Cooling roller shaft.
Middle roller shaft
Cooling roller shaft
Middle roller ASSY
Eject cooling
Paper eject ASSY
roller ASSY
Paper eject origin sensor
Hook
Paper eject ASSY
Hook
Hook
Paper eject origin sensor
Hook
To Next Page
Loading...
