Brother HL-L9300CDW - Page 261

3-120
Confidential
(5) Remove the five Taptite cup S M3x6 SR screws and remove the LT beam F ASSY from the
Main body .
Fig. 3-168
(6) Remove the Retaining ring E4 from the Feed roller and remove the Gear 24 and Feed
roller bushing.
Fig. 3-169
Taptite cup S M3x6 SR
LT beam F ASSY
Taptite cup S M3x6 SR
Taptite cup S M3x6 SR
<Front side>
Main body
Feed roller
Retaining ring E4
Gear 24
Feed roller bushing
<Left side>