Brother HL-L9300CDW - Page 366

7-17
Confidential
(10) Remove the one Taptite B 3x6 screw and the one Taptite bind B M4x12 screw from the
front of the Side cover R.
Fig. 7-27
(11) Remove the two Taptite bind B M4x12 screws from the back of the Side cover R.
Fig. 7-28
Taptite B 3x6
Taptite bind B M4x12
Side cover R
<Front side>
Taptite bind
B M4x12
Side cover R
<Back side>