2-67
Confidential
■ Error code 8402
While the T2 paper tray unit is open state, print or adjustment operation was attempted.
< User Check >
- Check if the T2 paper tray unit is closed correctly.
■ Error code 8403
While the T3 paper tray unit is open state, print or adjustment operation was attempted.
< User Check >
- Check if the T3 paper tray unit is closed correctly.
No Tray
The paper tray cannot be detected, re-install #T.
Step Cause Remedy
1 T2 paper feed actuator that has
come off or that has been caught
Re-assemble the T2 paper feed actuator.
2 Main PCB failure Replace the main PCB ASSY.
No Tray T3
-
Step Cause Remedy
1 T3 paper feed actuator that has
come off or that has been caught
Re-assemble the T3 paper feed actuator.
2 Main PCB failure Replace the main PCB ASSY.
To Next Page
Loading...
