Brother MFC-215C - Printing Individual Images

WALK-UP PHOTOCAPTURE CENTER
™
9 - 6
Printing images
Before you can print an individual image, you have to know the
image number.
1 Print the Index first.
(See Printing the Index (Thumbnails) on page 9-5.)
2 Make sure you have inserted the media card.
Press
(PhotoCapture).
3 Press ▲ or ▼ to choose Print Images.
Press
Menu/Set.
4 Use the dial pad to enter the image
number that you want to print from
the Index page (Thumbnails).
Press
Menu/Set.
Repeat this step until you have entered all the image numbers
that you want to print.
5 After you have selected all the image numbers,
press
Menu/Set again, and go to Step 6.
—OR—
If you have finished choosing settings, press
Colour Start.
If your media card contains valid DPOF information, the LCD
shows DPOF Print:Yes, please go to DPOF printing on page
9-8.
You can enter all the numbers at one time by using the key for
a comma or the
# key for hyphen.
(For example, Enter
136 - to print images No.1, No.3 and
No.6. Enter
1#5 to print images No.1 to No.5).
Enter & Set Key
No.:1,3,6