MAKING COPIES 8 - 7
5
Press ▲ or ▼ to select the enlargement or reduction ratio you
want.
Press
Menu/Set.
—OR—
You can select Custom(25-400%) and press
Menu/Set.
Use the dial pad to enter an enlargement or reduction ratio from
25% to 400%.
Press
Menu/Set.
(For example, press
5 3 to enter 53%.)
6
Press Mono Start or Colour Start.
(MFC-425CN only) Page layout options are not available with
Enlarge/Reduce.
Setting paper type
If you are copying on special paper, be sure to select the type of
paper you are using so you will get the best print quality.
1
Press (Copy) to illuminate it in green.
2
Load your document.
3
Use the dial pad to enter the number of copies you want
(up to 99).
4
Press Copy Options and ▲ or ▼ to select Paper Type.
Press
Menu/Set.
5
Press ▲ or ▼ to select the type of paper you are using (Plain,
Inkjet, Glossy or Transparency).
Press
Menu/Set.
6
Press Mono Start or Colour Start.
You can change the default Paper Type setting at any time.
(See Setting the Paper Type on page 2-3.)
To Next Page
Loading...
