Brother MFC-215C - Adjusting Default Brightness and Contrast; Adjusting Default Brightness; Color Enhancement Options (MFC-425 CN)

WALK-UP PHOTOCAPTURE CENTER
™
9 - 10
Adjusting brightness
1 Press Menu/Set, 4, 3.
2 Press ▲ to make a lighter print.
—OR—
Press
▼ to make a darker print.
Press
Menu/Set.
3 Press Stop/Exit.
Adjusting contrast
You can choose the contrast setting. More contrast will make an
image look sharper and more vivid.
1 Press Menu/Set, 4, 4.
2 Press ▲ to increase the contrast.
—OR—
Press
▼ to decrease the contrast.
Press
Menu/Set.
3 Press Stop/Exit.
Colour enhancement (MFC-425CN only)
You can turn on the colour enhancement feature to print more vivid
images. Printing time will be slower.
1 Press Menu/Set, 4, 5.
2 Press ▲ or ▼ to select On.
Press
Menu/Set.
—OR—
Select Off and press
Menu/Set, then go to Step 5.
If you select On, you can customize the White Balance,
Sharpness or Colour Density.