Brother MFC-215C - Changing Default PhotoCapture Settings; Setting Default Print Speed or Quality; Setting Default Paper and Size

9 - 9 WALK-UP PHOTOCAPTURE CENTER
™
Changing the default settings
You can save the PhotoCapture Center
™
settings you use most often
by setting them as default. These settings will remain until you
change them again.
Increasing print speed or quality
1 Press Menu/Set, 4, 1.
2 Press ▲ or ▼ to select Normal or Photo.
Press
Menu/Set.
3 Press Stop/Exit.
Setting the paper & size
1 Press Menu/Set, 4, 2.
2 Press ▲ or ▼ to select Letter Glossy, 10x15cm Glossy,
13x18cm Glossy, A4 Glossy, Letter Plain, A4 Plain,
Letter Inkjet, A4 Inkjet or 10x15cm Inkjet.
Press
Menu/Set.
If you selected Letter or A4, press
▲ or ▼ to select the print size
(10 x 8cm, 13 x 9cm, 15 x 10cm, 18 x 13cm, 20 x 15cm
or Max. Size).
Press
Menu/Set.
3 Press Stop/Exit.
The Max. Size is available for MFC-425CN only.