Appendix B
149
B
For MFC-253CW, MFC-255CW and MFC-257CW B
Level1 Level2 Level3 Options
5.Network 1.TCP/IP 1.BOOT Method Auto/Static/RARP/BOOTP/DHCP
2.IP Address [000-255].[000-255].[000-255].[000-255].
[000].[000].[000].[000]
1
3.Subnet Mask [000-255].[000-255].[000-255].[000-255].
[000].[000].[000].[000]
1
4.Gateway [000-255].[000-255].[000-255].[000-255].
[000].[000].[000].[000]
5.Node Name BRWxxxxxxxxxxxxx= (your machine’s Ethernet
address)
(up to 15 characters)
6.WINS Config Auto/Static
7.WINS Server Primary/Secondary
[000-255].[000-255].[000-255].[000-255].
[000].[000].[000].[000]
8.DNS Server Primary/Secondary
[000-255].[000-255].[000-255].[000-255].
[000].[000].[000].[000]
9.APIPA On/Off
2.Setup Wizard — (Choose SSID from list or manually add SSID)
3.SES/WPS/AOSS —
4.WPS w/PIN Code —
5.WLAN Status 1.Status Active(11b)/Active(11g)/
Connection Fail
2.Signal Signal:Strong/Signal:Medium/Signal:Weak/
Signal:None
3.SSID (Shows SSID with up to 32 digits)
4.Comm. Mode Ad-hoc/Infrastructure
6.MAC Address
7.WLAN Enable
On/Off
0.Network Reset
To Next Page
Loading...
Need help?
General
