Configuring your network printer
12
2
d Choose Static from Boot Method. Enter the IP address, Subnet Mask and Gateway (if needed) of
your print server.
Windows
®
Macintosh
®
e Click OK.
f With the correctly programmed IP address, you will see the Brother print server in the device list.
Using the control panel to configure your machine for a network 2
You can configure your machine for a network using the control panel LAN menu. See Control panel
setup on page 15.
Using other methods to configure your machine for a network 2
You can configure your machine for a network using other methods. See Other ways to set the IP address
(for advanced users and administrators) on page 42.
To Next Page
Loading...
Need help?
General
