Appendix B
50
B
Function table and default factory settings B
The factory settings are shown in bold.
1
On connection to the network, the machine will automatically set the IP address and Subnet Mask to value appropriate for your network.
2
For DCP560CN, the default Node Name is BRN_xxxxxx (where xxxxxx is the last six digits of the Ethernet address).
Level1 Level2 Level3 Options
LAN TCP/IP BOOT Method Auto/Static/RARP/BOOTP/DHCP
IP Address
[000-255].[000-255].[000-255].[000-255] *
1
Subnet Mask
[000-255].[000-255].[000-255].[000-255]*
1
Gateway [000-255].[000-255].[000-255].[000-255]
Node Name
BRNxxxxxxxxxxxxx= (your machine’s Ethernet address)
2
(up to 15 characters)
WINS Config Auto/Static
WINS Server (Primary)
[000-255].[000-255].[000-255].[000-255]
(Secondary)
[000-255].[000-255].[000-255].[000-255]
DNS Server (Primary)
[000-255].[000-255].[000-255].[000-255]
(Secondary)
[000-255].[000-255].[000-255].[000-255]
APIPA On/Off
Setup Misc. Ethernet Auto/100B-FD/100B-HD/10B-FD/10B-HD
Factory
Reset