Control panel setup
24
3
Printing the Network Configuration List 3
Note
Node Name: Node Name appears in the Network Configuration List. The default Node Name is
“BRNxxxxxxxxxxxx”
1
for a wired network (“xxxxxxxxxxxx” is your machine’s Ethernet address).
1
For DCP-560CN, the default Node Name is BRN_xxxxxx (“xxxxxx” is the last six digits of Ethernet address).
The Network Configuration List prints a report listing all the current network configuration including the
network print server settings.
a Press Menu.
b Press a or b to select Print Reports.
Press OK.
c Press a or b to select Network Config.
Press OK.
d (For US) Press Black Start or Color Start.
(For UK) Press Mono Start or Colour Start.
To Next Page
Loading...
Need help?
General
