Brother MFC-7225N - Sub Chute ASSY

Confidential
5-53
NOTE:
• When replacing the laser unit, replace the barcode label attached on the gear plate
calking ASSY with a new one supplied with a new unit.
• Another barcode label supplied with a new unit is spare. Make sure to throw it out.
5.1.23 Sub Chute ASSY
(1) Remove the two bind B M4x12, taptite screws, and then remove the sub chute ASSY.
Main frame L
Gear plate calking ASSY
1 to 2 m
m
Chute
Taptite, bind B M4x12
Sub chute ASSY
Taptite, bind B M4x12
Barcode label
2 to 3 mm