Brother MFC-7225N - 9 ] Setting the Serial Number

6-2 Confidential
[ 9 ] Setting the serial number
(1) Double-click the brmainte.EXE file
(maintenance utility) stored in the PC.
(2) Select Input Information from Menu.
Select the applicable model name.
(See step2 of the left illustration)
(3) Check the port (USB) which the
machine is connected through and click
“Serial No.”.
(See step3 of the left illustration)
(4) Enter the serial number (the last nine
digits) of the machine and click the OK
button. (See step4 of the left illustration)
(Refer to the NOTE below for the serial
number label)
(5) The serial number is shown in the
window, and check if it is correct. The
setting of the serial number is
completed.
NOTE: Please refer to the illustration below for the identification and the location of the
serial number label.
SER.NO.
MADE IN CHINA
>PS<
FOR HOME OR OFFICE USE
With FCC Standerds
Tested To Comply
Connectors:USOC RJ11C
REN(US):0.6B
FCC Registration. No. US:B3QFA06B8X5A13
Complies With Part 68, FCC Rules HAC
pursuant to Laser Notice No.50, dated July 26,2001.
standards for laser products except for deviations
This product complies with FDA performance
Rong Gang, Shenzhen, China.
Gold garden Industry, Nan Ling Village,Buji,
BROTHER BUJI NAN LING FACTORY
BROTHER CORP.(ASIA)LTD.
MANUFACTURED :
U
L
LISTED
C
I.T.E.
1T22
MODEL
MFC-7220
SER. NO.
110V-120V 50/60HZ 8.8A
BROTHER INDUSTRIES, LTD.
J
Step (3)
Step (3)
Step (4)
Step (2)
Serial numbe
r
label
Enter the last 9 digits shown on the label
Serial number label