Brother MFC-7225N - Link Lever

Confidential
5-54
5.1.24 Link Lever
(1) Turn the printer body upside down.
(2) Pull the “A” section outwards and remove the link lever.
NOTE: When re-assembling the link lever, insert the end of the link lever into the main
frame L referring to the figure below.
Link leve
r
“A”
Printer top side
(Printer body upside down)
2
1
Main frame L
Chute
Link leve
r
Link leve
r
* The figure see
n
from the left side.
Hook C
Printer top side
(Printer body upside down)
Hook B
1