Brother MFC-7225N - Printout of Scanning Compensation Data (Function Code 05)

8-6 Confidential
8.4.2 Printout of Scanning Compensation Data (Function code 05)


 Function
The machine prints out the white and black level data for scanning compensation.


 Operating Procedure
Do not start this function merely after powering on the equipment but start it after carrying
out a sequence of scanning operation. Unless the equipment has carried out any scanning
operation, this function cannot print out correct scanning compensation data. This is
because at the start of scanning operation, the equipment initializes white and black level
data and takes in the scanning compensation reference data.
(1) Press the 0 and 5 keys in this order in the initial stage of the maintenance mode.
The "WHITE LEVEL 1" will appear on the LCD.
(2) The equipment prints out the scanning compensation data list containing the following:
a) Bright output adjustment value 1Byte
b) Illuminant adjustment value 1Byte
c) Black level MIN data 1Byte
d) Black level MAX data 1Byte
e) White level MIN data 1Byte
f) White level MAX data 1Byte
g) Background color compensated data 1Byte
h) Black level data 1664Byte
i) White level data 1664Byte
(3) Upon completion of recording of the compensation data list, the equipment returns to
the initial stage of the maintenance mode.
NOTE: If any data is abnormal, its code will be printed in inline style, as shown on the next
page.