Brother MFC-7225N - Operating Procedure

App. 3-1 Confidential
EEPROM CUSTOMIZING CODES
This function allows you to customize the EEPROM according to language, function settings, and
firmware switch settings.
 Operating Procedure
(1) Press the Menu/Set and Start keys. Next press the
key four times to make the machine
enter the maintenance mode.
TIP: FAX models equipped with numerical keypads can enter the maintenance mode in the
same way as conventional models; that is, by pressing the Menu/Set, *, 2, 8, 6 and 4
keys in this sequence.
The machine beeps for approx. one second and displays "
" on the
LCD.
(2) Press the 7 and 4 keys in this order in the initial stage of the maintenance mode.
The current customizing code appears (e.g., 8001 in the case of FAX-2820 U.S.A. model).
(3) Enter the desired customizing code (e.g., 0002 in the case of FAX-2820 CANADA model).
The newly entered code appears.
NOTE: If a wrong 4-digit code is entered, the machine will malfunction.
(4) Press the Start key.
The machine saves the setting and returns to the initial stage of the maintenance mode.
If you press the Stop/Exit key or no keys are pressed for one minute in the above procedure,
the machine stops the procedure and returns to the initial stage of the maintenance mode.