Brother MFC-8220 - Page 162

8 - 11 USING YOUR MFC WITH A MACINTOSH
®
For Mac OS
®
X users
You need to install the PS driver using the following instructions.
■
If a Brother Native Driver (MFC-XXX) is already listed in
Printer list, you will need to delete it and then install the PS
driver.
■
To use the PS driver with a USB cable, you need to set the
Emulation
to
BR-Script 3
(
Menu
,
4
,
1
) before
connecting the USB cable. (See
Setting the Emulation
Selection
on page 1-12.)
1
Select Applications from the Go menu.
2
Open the Utilities folder.
■
If you use a USB cable and your Macintosh
®
is “Mac OS
®
X”,
only one printer driver for an MFC can be registered in Print
Center.