Brother MFC-8500 User Manual

11 - 4 MAKING COPIES
Using the Options Key
Use the Options key to temporarily change the copy mode (resolution),
contrast and special copy options for the next fax only. See the explanations
below the table.
Copy Mode (Type of Original)
You can select the Copy resolution for your type of original. The default setting
is AUTO, which is used for originals that contain both text and photographs.
TEXT is used for originals containing only text. PHOTO is used for copying
photographs.
1 Place the original face down in the ADF.
2 Use the dial pad to enter the number of copies you want (up to 99).
3 Press Options and or to select
OPT: COPY MODE, and then press
Set.
4 Press or to choose the type of
original, and then press Set.
5 Press Copy. —OR— Press or
for additional settings.
Copy Contrast
You can adjust the copy contrast to make copies darker or lighter.
1 Place the original face down in the ADF.
2 Use the dial pad to enter the number of copies you want (up to 99).
3 Press Options and or to select
OPT: CONTRAST, and then press Set.
4 Press to make a copy lighter, or to make a copy darker, and then press
Set.
5 Press Copy. —OR— Press or for additional settings.
Press
Options
Menu Selections Options Factory Setting
OPT:# OF COPIES NO. OF COPIES:XX 01
OPT:COPY MODE AUTO/TEXT/PHOTO AUTO
OPT:CONTRAST - + - +
OPT:STACK/SORT STACK / SORT STACK
OPT:SPECIAL 2IN1 / 4IN1 / OFF OFF
OPT:COPY MODE
AUTO?
TEXT?
PHOTO?
OPT:CONTRAST

Brother MFC-8500 Specifications

General

Brand	Brother
Model	MFC-8500
Category	All in One Printer
Language	English