1 - 2 INTRODUCTION
Test Sheet Procedure and Product Registration
(For USA Only)
After programming your Station ID, please fill out the TEST SHEET included
with your machine and then fax it to Brother’s Automated Fax Response System
as your first transmission. This will verify that your machine is properly
installed. To receive a response, you must set up your Station ID. (See
Setting
Station ID
, Page 4-3.)
When this document is received, a confirmation sheet and Product Registration
form will be sent back to your machine. Please fill out the form and return it to
complete your registration.
To Complete Your MFC-8500 Registration On-Line
(For USA Only)
1
Insert the MFL Pro CD-ROM into your CD-ROM drive.
2
Click On-Line Registration to register your product on-line from the main
menu.
In USA: 1-877-268-9575 (fax)
To Next Page
Loading...
