Brother MFC-8500 - Installing the Remote Printer Console

12 - 2 FOR DOS USERS
Installing the Remote Printer Console
Before you install the program, make sure you have the following hardware and
software to install the program:
DOS Version 3.3 or later
Monitor EGA/VGA or compatible
Option Mouse; the mouse driver must be installed.
(You can also operate the program with the keyboard.)
Follow these steps to install the remote printer console program:
1 Make sure your Brother machine is connected to your computer and is set to
Online.
2 Start your computer and go to the DOS prompt. If you are in Windows
®
, exit
and return to the DOS prompt.
3 Insert the Brother CD-ROM into your CD-ROM drive.
4 At the DOS prompt (C:\>) type x: (Substitute the drive letter of your CD-ROM
drive for “x”) and then press Enter.
5 Type CD RPCX and then press Enter.
6 Type RPCSETUP and then press Enter.
7 Follow the instructions in the installer.
C:\>x:
x:\>CD RPCX
x:\RPCX>RPCSETUP