17 - 17
SETTING UP AND USING PC FAX (FOR WINDOWS
®
ONLY)
Setting Up Your PC
1
Right-click the PC-FAX icon on your PC Task Bar,
and then click PC-Fax RX Setup.
2
The PC-Fax RX Setup dialog box will appear:
3
In Ring Delay, select the number of rings before your PC answers incoming
calls.
4
In Save file to, use the Browse button if you want to change the path where PC-
FAX files will be saved.
5
Make sure File Format is checked for .max (Default Required to use with
PaperPort).
6
If you want to, you can check the Play wave file when receiving FAX check
box, and then enter the path.
7
To load PC FAX receiving automatically when you statup Windows
®
, select the
Add to Startup folder check box.
Viewing New PC FAX Messages
Each time you start to receive a PC FAX, the Blue and Red icons will
blink on the PC Task Bar. The Red icon will remain.
1
Run PaperPort.
2
Open the Fax Received folder.
3
Double-click any of the new faxes to open and view them.
The title example of your unread PC message.
“Fax 2-20-2002 16:40:21 max”
To Next Page
Loading...
