Brother MFC-8500 - Quick Reference Guide; Receiving Faxes; Sending Faxes

vii
Quick Reference Guide
Sending Faxes
Automatic Transmission
1 Place the original face down in the ADF.
2 Enter the fax number using One Touch,
Speed Dial, Search or the dial pad.
3 Press Fax Start .
Sending a Cover Page
1 Place the original face down in the ADF.
2 Press Menu , 2 , 2 , 8 .
3 When NEXT FAX ONLY?
appears, press
Set .
4 Press or to select ON
(or
OFF ), and then press Set .
5 Press or to select a comment,
and then press
Set .
6 Enter two digits to indicate the number
of pages being sent, and then press
Set .
7 Press 1 to select additional settings
—
OR —Press 2 if you are ready to
fax.
8 Enter the fax number.
9 Press Fax Start .
Real Time Transmission
You can send faxes in real time.
1 Place the original face down in the
ADF.
2 Press Menu, 2, 2, 6.
3 Press or to select ON , and
then press
Set — OR —For the next
transmission only press
or to
select
NEXT FAX ONLY , and
then press
Set .
4 For the next fax only, press or
to select
ON , and then press Set .
5 Press 1 to select additional settings
—
OR —Press 2 to fax.
6 Enter the fax number.
7 Press Fax Start .
Receiving Faxes
Select Receive Mode
You can select FAX/TEL, TAD,
MANUAL
or FAX ONLY by
pressing the Mode button repeatedly
until you have changed the FAX and
FAX/TEL lights to the setting you want
to use.
If you select
FAX/TEL , make sure
you set Ring Delay and F/T Ring Time.
Manual Reception
1 Pick up the handset.
2 Press Fax Start if you hear fax tones
(beeps).
3 When the LCD shows
RECEIVING , replace the handset.
Brother fax-back system:
In USA: 1-800-521-2846
Brother Global Web Site:
http://www.brother.com
Frequently Asked Questions (FAQs):
http://solutions.brother.com
Brother Accessories & Supplies :
In USA:
1-888-879-3232 (voice)
1-800-947-1445 (fax)
http://www.brothermall.com
In Canada:
1-877-BROTHER (voice)
QUICK REFERENCE GUIDE