Printing
37
Auto Detect (4)
The Auto Detect function finds the currently installed optional devices and shows the available settings in
the printer driver. When you click Auto Detect, options that are installed on the machine will be listed in
Available Options (1). You can manually add or remove the options by choosing an optional device you
want to add or remove, and then click Add or Remove.
The Auto Detect (4) function is not available under the following machine conditions:
• The machine is powered off.
• The machine is connected to the print server using a USB cable in a network shared environment.
• The cable is not connected to the machine correctly.
Ports tab 2
To access the Ports tab, see Accessing the printer driver settings uu page 17.
If you want to change the port where your machine is connected or the path to the network machine you are
using, choose or add the port you want to use.
To Next Page
Loading...
Need help?
General
