Brother MFC-8540DN Service Manual

2-72
Confidential
 Error code 9701
A tray set to duplex printing-incompatible size was specified in duplex printing.
Error code 9702
When printing from paper tray 1, a paper size not supported for paper tray 1 was specified
from the driver.
Error code 9703
When printing from paper tray 2, a paper size not supported for paper tray 2 was specified
from the driver.
Error code 9704
When printing from paper tray 3, a paper size not supported for paper tray 3 was specified
from the driver.
Error code 9705
When printing from paper tray 4, a paper size not supported for paper tray 4 was specified
from the driver.
Error code 9706
When printing from paper tray 5, a paper size not supported for paper tray 5 was specified
from the driver.
 Error code 9B03
Only T2 tray is set for A4 / Letter / Legal / Folio but T2 is set as "Skip Tray".
Error code 9B04
Only T3 tray is set for A4 / Letter / Legal / Folio but T3 is set as "Skip Tray".
Error code 9B05
Only T4 tray is set for A4 / Letter / Legal / Folio but T4 is set as "Skip Tray".
Error code 9B06
Only T5 tray is set for A4 / Letter / Legal / Folio but T5 is set as "Skip Tray".
<User Check>
• Select the specified paper size in the driver and set paper with the same size to the
specified paper tray.
Step Cause Remedy
1 Main PCB failure Replace the main PCB ASSY.
<User Check>
• Check the paper or Skip Tray setting.
Step Cause Remedy
1 Main PCB failure Replace the main PCB ASSY.

Brother MFC-8540DN Specifications

General

Brand	Brother
Model	MFC-8540DN
Category	All in One Printer
Language	English