4-36
Confidential
(15) Remove the two bind B M4x12 Taptite screws, and release the Hooks by following
direction from 15a to 15b, then remove the Side cover R.
Fig. 4-55
(16) Remove the two cup S M3x6 Taptite screws, remove the ADF FG harness and FB FG
harness.
(17) Disconnect the two Connectors from the Driver PCB.
(18) Disconnect the two Connectors from the Main PCB.
Fig. 4-56
Taptite bind B M4x12
Hook
Hooks
Hook
Side cover R
Hooks
Taptite bind B M4x12
15d
15c
15b
15a
Driver PCB
Driver PCB
Document eject
sensor harness
FB FG harness
ADF FG harness
FB cover sensor harness
ADF relay harness
Main PCB
ADF motor harness
Main PCB
Taptite cup S M3x6
To Next Page
Loading...
