Brother MFC-8890DW - Motor Frame ASSY

5-104
Confidential
9.8.47 Motor Frame ASSY
(1) Remove the three cup S M3x6SR Taptite screws and one cup S M3x10 Taptite screw,
and remove the Motor frame ASSY.
Fig. 5-110
Fig. 5-111
Assembling Note:
• When assembling the Motor frame ASSY, ensure that the gears (indicated with gray)
are placed in the positions as shown in the figure below.
• Check that the “A” part is the upper side of the Exit chute.
Taptite cup S M3x6SR
Motor frame ASSY
"A" part of the
Motor frame ASSY
Taptite cup S M3x10
Exit chute
Switch back flap planetary gear
Paper feed planetary gear
Pick up planetary gear
Pick up solenoide ASSY
Switch back flap planetary gear
<ADF unit gear layout drawing of the old type>
<ADF unit gear layout drawing of the new type>
Paper feed planetary gear
Pick up planetary gear
Pick up solenoide ASSY