Brother MFC-8890DW - Page 219

4-40
Confidential
(28) Remove the four bind B M4x12 Taptite screws from the Joint cover.
(29) Release all Hooks of the Joint cover and lift up the front side of the Joint cover.
(30) Pull out the Joint cover’s Bosses to the front side.
Fig. 4-62
(31) Slide the Sub duct to the direction of 32b while pressing the Hook to the direction of 32a
and remove the Sub duct from the Air duct.
Fig. 4-63
30
29
<Left side>
Taptite bind B M4x12
Taptite bind B M4x12
Taptite bind B M4x12
<Front side>
Bosses
Hooks
Hooks
Hooks
Joint cover
Air duct
Hook
Sub duct
<Back side>
31a
31b
31c