24
Installing the Driver & Software
G
When this screen appears, connect the
parallel interface cable to your PC, and then
connect it to the machine.
Turn on the machine by plugging in the
power cord.
.
The installation of the Brother driver will
automatically start. Follow the instructions
on the screen.
H
When the following screen appears, click
Finish and wait as the PC restarts Windows
and continues the installation.
For Parallel Interface Cable Users
(For Windows
®
95/98/98SE/Me/2000 Professional/XP)
For Windows
®
XP Users Only
The Brother PC fax, Printer and
Scanner drivers have been installed
and the installation is now complete.
Step 2
To Next Page
Loading...
