28
Installing the Driver & Software
Make sure that you have completed the instructions from Step 1 “Setting Up the
machine”.
1
Unplug the machine from the AC outlet and
disconnect it from your Macintosh
®
if you
already connected an interface cable.
2
Turn on your Macintosh
®
.
3
Insert the supplied CD-ROM into your CD-
ROM drive.
4
Double-click the MFC Software Suite
Installer icon to install the printer and
scanner drivers.
5
After the installation is completed, restart
your Macintosh
®
.
6
Connect the USB interface cable to your
Macintosh
®
, and then connect it to the
machine.
7
Turn on the machine by plugging in the
power cord.
8
From the Apple
®
menu, open the Chooser.
For Mac
®
OS 8.5 - 9.2 Users
Do not connect the machine to a USB
port on a keyboard or a non powered
USB hub.
Step 2
To Next Page
Loading...
