Brother MFC-9130CW - Sending or Receiving an E-Mail Securely; Configuration Using Web Based Management (Web Browser)

Security features
99
7
Sending or Receiving an E-mail securely 7
Configuration using Web Based Management (web browser) 7
You can configure secured E-mail sending with user authentication or E-mail sending and receiving using
SSL/TLS on the Web Based Management screen.
a Start your web browser.
b Type “vmachine’s IP address/” into your browser’s address bar (where “machine’s IP address” is the
IP address of the machine or the print server name).
 For example: v192.168.1.2/
c No password is required by default. If you have previously set a password, enter it and press .
d Click Network.
e Click Protocol.
f Click Advanced Setting of POP3/SMTP and make sure that the status of POP3/SMTP is Enabled.
g You can configure the POP3/SMTP settings on this page.
NOTE
• For more information, see the Help text in Web Based Management.
• You can also confirm whether the E-mail settings are correct after configuration by sending a test E-mail.
• If you do not know the POP3/SMTP server settings, please contact your system administrator or ISP
(Internet Service Provider) for details.
h After configuring, click Submit. The Test E-mail Send/Receive Configuration dialog box appears.
i Follow the instructions on-screen if you want to test with the current settings.