Brother MFC-9130CW - Reset the Network Settings to the Factory Default

Control panel setup
47
4
Reset the network settings to the factory default 4
You can reset the print server back to its default factory settings (resetting all information such as the
password and IP address information).
NOTE
• This function resets all wired and wireless network settings to the factory default.
• You can also reset the print server back to its factory default settings using the BRAdmin applications or
Web Based Management. (For more information, see Other Management Utilities on page 8.)
a Press .
b Press All Settings.
c Swipe up or down, or press a or b to display Network.
Press Network.
d Swipe up or down, or press a or b to display Network Reset.
Press Network Reset.
e Press Yes.
f Press Yes for 2 seconds to confirm.