Brother MFC-9130CW - Function Table and Default Factory Settings

Control panel setup
49
4
Function table and default factory settings 4
The factory settings are shown in Bold with an asterisk.
NOTE
(For MFC-9130CW, MFC-9140CDN, MFC-9330CDW and MFC-9340CDW)
• Internet Fax, Fax to Server and Scan to E-mail Server functions are available as downloads.
• In order to use this function, please download the necessary firmware from the “Downloads” page for your
model on the Brother Solutions Center at http://solutions.brother.com/
.
Main Menu Submenu Menu Selections Options
Network Wired LAN
(DCP-9020CDN,
DCP-9020CDW,
MFC-9140CDN,
MFC-9330CDW
and
MFC-9340CDW)
TCP/IP BOOT Method Auto*
Static
RARP
BOOTP
DHCP
(If you choose Auto, RARP, BOOTP or
DHCP, you will be asked to enter how
many times the machine tries to
obtain the IP address.)
IP Address
[000-255].[000-255].[000-255].[000-255]
[000].[000].[000].[000]*
1
Subnet Mask [000-255].[000-255].[000-255].[000-255]
[000].[000].[000].[000]*
1
Gateway [000-255].[000-255].[000-255].[000-255]
[000].[000].[000].[000]*
Node Name BRNxxxxxxxxxxxx
(up to 32 characters)
WINS Configuration Auto*
Static
WINS Server Primary
[000-255].[000-255].[000-255].[000-255]
[000].[000].[000].[000]*
Secondary
[000-255].[000-255].[000-255].[000-255]
[000].[000].[000].[000]*