EasyManuals Logo

Brother MFC-9325CW User Manual

Brother MFC-9325CW
262 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #158 background imageLoading...
Page #158 background image
146
Cooling Down
Wait for a while
The temperature of the drum unit
or toner cartridge is too hot. The
machine will pause its current
print job and go into cooling down
mode. During the cooling down
mode, you will hear the cooling
fan running while the LCD shows
Cooling Down, and
Wait for a while.
Make sure that you can hear the fan in the
machine spinning and that the exhaust outlet
is not blocked by something.
If the fan is spinning, remove any obstacles
that surround the exhaust outlet, and then
leave the machine turned on but do not use
it for several minutes.
If the fan is not spinning do the following:
Disconnect the machine from the power for
several minutes, then reconnect it. (The
machine can be turned off for up to 4 days
without losing faxes stored in the memory.
See Transferring your faxes or Fax Journal
report on page 151.)
Comm.Error Poor telephone line quality
caused a communication error.
Try sending the fax again or try connecting
the machine to another telephone line. If the
problem continues, call the telephone
company and ask them to check your
telephone line.
Connection Fail You tried to poll a fax machine
that is not in Polled Waiting mode.
Check the other fax machine’s polling setup.
Cover is Open The ADF cover is not closed
completely.
Close the ADF cover of the machine, then
press Stop/Exit.
The top cover is not closed
completely.
Close the top cover of the machine.
Cover is Open The fuser cover is not closed
completely or paper was jammed
in the back of the machine when
you turned on the power.
Close the fuser cover of the machine.
Make sure paper is not jammed inside
the back of the machine, and then close
the fuser cover and press Mono Start or
Colour Start.
DIMM Error The DIMM is not installed
correctly. Or the DIMM is broken.
Turn off the machine. Re-install the DIMM
correctly. Wait a few seconds, and then turn
it on again. If this error message appears
again, replace the DIMM with a new one.
(See Installing extra memory on page 126.)
Disconnected The other person or other
person’s fax machine stopped the
call.
Try to send or receive again.
Document Jam The document was not inserted
or fed correctly, or the document
scanned from the ADF was too
long.
See Document jams on page 152 or Using
the automatic document feeder (ADF)
on page 23.
Drum Error The corona wire on the drum unit
needs to be cleaned.
Clean the corona wire on the drum unit. (See
Cleaning the corona wires on page 161.)
It is time to replace the drum
units.
Replace the drum unit with a new one for the
colour that is indicated on the LCD. (See
Replacing the drum units on page 178.)
Error Message Cause Action

Table of Contents

Other manuals for Brother MFC-9325CW

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Brother MFC-9325CW and is the answer not in the manual?

Brother MFC-9325CW Specifications

General IconGeneral
DVD/CD printingNo
Print technologyLED
Maximum resolution2400 x 600 DPI
Economical printingYes
Print speed (black, normal quality, A4/US Letter)19 ppm
Fax compatibilityITU-T G3
Dimensions (WxDxH)429.3 x 490.2 x 391.8 mm
All-in-one functionsCopy, Fax, Print, Scan
Connectivity technologyWired & Wireless
Display number of colorsMonochrome
Color all-in-one functionscopy, fax, print, scan
Printing colorsBlack, Cyan, Magenta, Yellow
Maximum duty cycle25000 pages per month
Recommended duty cycle1500 pages per month
Number of print cartridges4
Page description languagesBR-Script 3, PCL 6
Copier resize25 - 400 %
Maximum copy resolution- DPI
Maximum number of copies35 copies
N-in-1 copy function (N=)2, 4
Copy speed (black, normal quality, A4)19 cpm
Scan toCIFS, E-mail, File, FTP, Image, OCR, USB
Scanner typeFlatbed scanner
Input color depth48 bit
Maximum scan areaA4 / Letter (216 x 297) mm
Maximum scan resolution19200 x 19200 DPI
Optical scanning resolution1200 x 2400 DPI
Fax memory600 pages
Modem speed33.6 Kbit/s
Fax coding methodsJBIG, JPEG, MH, MMR (Fax coding method), MR
Fax transmission speed2 sec/page
Paper input typePaper tray
Total input capacity250 sheets
Total output capacity100 sheets
Total number of input trays2
Multi-Purpose tray input capacity1 sheets
Maximum print size216 x 356 mm
Paper tray media typesBond paper, Envelopes, Labels, Plain paper, Recycled paper
ISO A-series sizes (A0...A9)A4, A5, A6
ISO B-series sizes (B0...B9)B5
Maximum ISO A-series paper sizeA4
DisplayLCD
Market positioningBusiness
Standard interfacesEthernet, USB 2.0, Wireless LAN
USB 2.0 ports quantityUSB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Wi-Fi standards802.11b, 802.11g
Supported network protocols (IPv4)ARP, RARP, BOOTP, DHCP, APIPA(Auto IP), WINS/NetBIOS name resolution, DNS Resolver, mDNS, LLMNR responder, LPR/LPD, Custom Raw Port/Port9100, IPP/IPPS, FTP Client and ServerTELNET Server, HTTP/HTTPS server, TFTP client and server, SMTP Client, APOP, POP before SMTP, SMTP-AUTH, SNMPv1/v2c/v3, ICMP, LLTD responder, WebServicesPrint, CIFS Client, SNTP, SSL/TLS
Supported network protocols (IPv6)NDP, RA, DNS resolver, mDNS, LLMNR responder, LPR/LPD, Custom Raw Port/Port9100, IPP/IPPS, FTP Client and Server, TELNET Server, HTTP/HTTPS server, TFTP client and server, SMTP Client, APOP, POP before SMTP, SMTP-AUTH, SNMPv1/v2c/v3, ICMPv6, LLTD responder, WebServicesPrint, CIFS Client, SNTP, SSL/TLS
Maximum internal memory576 MB
Sound power level (standby)30 dB
Sound pressure level (copying)53 dB
AC input voltage120 V
AC input frequency50 - 60 Hz
Power consumption (standby)75 W
Power consumption (PowerSave)12 W
Power consumption (average operating)480 W
Package weight28490 g
Operating relative humidity (H-H)20 - 80 %

Related product manuals