Brother MFC-9330CDW Quick Setup Guide

17
Windows
®
Wired Network
Windows
®
Macintosh
Wired Network
c Choose Wired Network Connection
(Ethernet), and then click Next.
d When the Firewall/AntiVirus detected screen
appears, choose Change the Firewall port
settings to enable network connection and
continue with the installation.
(Recommended) and click Next.
If you are not using the Windows
®
Firewall, see
the user’s guide for your software for
information on how to add the following
network ports:
 For network scanning, add UDP port 54925.
 For network PC-Fax receiving, add UDP port
54926.
 If you still have trouble with your network
connection, add UDP ports 161 and 137.
e The installation will automatically continue. The
installation screens appear one after another. If
prompted, follow any on-screen instructions.
f When the On-Line Registration screen
appears, make your selection and follow the
on-screen instructions. Once you have
completed the registration process, click Next.
g When the Setup is Complete screen appears,
make your selection, and then click Next.
18
Finish and restart
a Click Finish to restart your computer. After
restarting the computer, you must log on with
Administrator rights.
NOTE
To install the PS driver (BR-Script3 printer driver),
choose Custom Install, and then follow the
on-screen instructions.
IMPORTANT
DO NOT cancel any of the screens during the
installation. It may take a few minutes for all
screens to appear.
NOTE
• If prompted, choose your machine from the list,
and then click Next.
• If your machine is not found over the network,
confirm your settings by following the on-screen
instructions.
• If there is more than one of the same model
connected on your network, the IP Address and
Node Name will be displayed to help you
identify the machine.
• You can find your machine’s IP address and the
Node Name by printing out the Network
Configuration Report (see Print the Network
Configuration Report on page 39).
• If the Windows Security screen appears,
select the check box and click Install to
complete the installation correctly.
NOTE
• If an error message appears during the
software installation, do one of the following:
- For Windows
®
XP, Windows Vista
®
and
Windows
®
7 users: run the Installation
Diagnostics located in (Start) >
All Programs > Brother > MFC-XXXX LAN
(where MFC-XXXX is your model name).
- For Windows
®
8 users: to run Installation
Diagnostics, double-click the (Brother
Utilities) icon on the desktop, and then click
the drop-down list and select your model
name (if not already selected). Click Tools in
the left navigation bar.
• Depending on your security settings when using
the machine or its software, a Windows
®
Security or antivirus software window may
appear. Please allow or permit the window to
continue.

Brother MFC-9330CDW Specifications

Print Specifications

print speed black	up to 23 ppm
print speed color	up to 23 ppm
print resolution	up to 600 x 2400 dpi

Copy Specifications

copy speed black	up to 23 cpm
copy speed color	up to 23 cpm
copy resolution	600 x 600 dpi

Scan Specifications

scan resolution optical	1200 x 2400 dpi
scan resolution interpolated	19200 x 19200 dpi
document glass size	8.5” x 11.7”

Fax Specifications

fax modem speed	33.6k bps
fax page memory	up to 500 pages
speed dial locations	200

Paper Handling

auto document feeder capacity	up to 35 pages
paper size maximum	up to 8.5” x 14” (legal)
standard paper capacity	250 sheets

Power and Energy

deep sleep mode power consumption	<2W
automatic duplex printing	Yes
energy star qualified	Yes