Brother MFC-9460CDN - Page 248

3-65
Confidential
(3) Remove one Taptite cup S M3x6 SR screw each for the FB FG harness ASSY and ADF
FG harness ASSY to remove them from the Main body.
Fig. 3-62
(4) Disconnect the five Connectors (CN3, CN4, CN6, CN7, and CN8) and two Flat cables
(CN1 and CN2) from the Main PCB ASSY.
Fig. 3-63
Taptite cup S M3x6 SR
Main body
Taptite cup S M3x6 SR
FB FG harness ASSY
ADF FG harness ASSY
CN1 CN3 CN4 CN6
CN7
CN8
CN9
CN10
CN12
CN13
CN15
CN17
CN11
CN22
CN30
CN27
CN26
CN25
CN24CN23
CN2
Main PCB ASSY