Brother MFC-9460CDN Service Manual

2-32
Confidential
3.4 Error Cause and Remedy
Check the User Check items first. If an error cannot be resolved, follow the procedures in
numerical order in the Step field.
■ Error code 0B
Touch panel no response error.
Error code 0E
Touch panel failure upon start-up of the machine.
<User Check>
- Turn OFF the power switch, and turn it ON again after a while.
■ Error code 0F
The back cover is open upon duplex printing. (The back cover sensor is OFF.)
<User Check>
- Close the back cover.
---
---
Step Cause Remedy
1 Harness connection failure of
LCD unit
Check the harness connection of the
LCD unit and reconnect it.
2 LCD unit failure Replace the touch panel ASSY.
3 Main PCB failure Replace the main PCB ASSY.
Duplex Disabled
Close the Back Cover of the machine.
Step Cause Remedy
1 Harness connection failure of
back cover sensor
Check the harness connection of the
back cover sensor ASSY and reconnect it.
2 Back cover damaged Replace the back cover.
3 Back cover sensor failure Replace the back cover sensor ASSY.
4 Main PCB failure Replace the main PCB ASSY.

Brother MFC-9460CDN Specifications

General

Type	all in one
Color	black
Automatic Document Feeder Capacity	35 sheets
Paper Size	plain paper, thin paper, thick paper, thicker paper, recycled paper, bond, label, envelope, thin envelope, thick envelope, glossy paper
Paper Handling	up to 300 sheets
Color Print Speed	25 pages per minute
Mono Print Speed	25 pages per minute
Print Resolution Mono	up to 2400 x 600
Print Resolution Color	up to 2400 x 600
Maximum Number of Pages Per Month	up to 40, 000
Scan Resolution	up to 1200 x 2400
Copier Resolution Mono	up to 2400 x 600
Number Of Cartridges	4
Internal Memory	yes
Memory Card	no
Network	wired
Connectivity	usb 2.0
OS Compatibility	none
Mobile Devices Connection	yes

Weight and Dimensions

Height	19.4 inches
Width	19.8 inches
Net Weight	58.4 pounds