3-98
Confidential
(5) Fold the Second side scanning CIS flat cable at the position 200 mm away from the
Second side scanning CIS side.
Fig. 3-123
(6) Align the Second side scanning CIS flat cable to the angle of the Rib of the FFC holder
ASSY and pass it through the FFC holder ASSY as shown in the figure below, and then
affix it to the double-sided adhesive tape affixed to the FFC holder ASSY.
Fig. 3-124
Second side scanning CIS flat cable
200 mm
Reinforcement tape
Reinforcement plate
Fold down FFC along with the solid line
FFC holder ASSY
Pass the harness through here.
Second side scanning CIS flat cable
Affix it to the double-sided
Rib (Align the folded area to this part.)
Second side scanning
FFC holder ASSY
adhesive tape.
CIS flat cable
To Next Page
Loading...
