Brother MFC-9460CDN - Page 309

3-126
Confidential
(2) Remove the three Screw pan (S/P washer) M3x6 screws to remove the Touch panel PCB
ASSY from the Panel cover.
Fig. 3-175
(3) Lift the Touch panel PCB insulation sheet L, and remove the six Taptite cup B 3x8 screws
and FG harness.
(4) Remove the Touch panel PCB shield plate ASSY from the Panel cover.
Fig. 3-176
Screw pan (S/P washer) M3x6
Panel cover
Touch panel PCB ASSY
Screw pan (S/P washer) M3x6
Taptite cup B 3x8
Touch panel PCB
Touch panel PCB insulation sheet L
Pin
Taptite cup B 3x8
Pin
Panel cover
FG harness
shield plate ASSY