Brother MFC-9460CDN - Page 333

3-150
Confidential
(7) Remove the two Taptite cup S M3x6 SR screws to remove the Top beam from the Base
frame unit.
Fig. 3-219
(8) Remove the five Taptite cup S M3x6 SR screws to remove the four Scanner holders.
Fig. 3-220
Base frame unit
Top beam
Taptite cup S M3x6 SR
<Front>
Taptite cup S M3x6 SR
Scanner holder
Taptite cup S M3x6 SR
Taptite cup S M3x6 SR
Taptite cup S M3x6 SR
Taptite cup S
Scanner holder
Scanner holder
Scanner holder
M3x6 SR
Base frame unit
Scanner holder
Laser unit
<Front>