Brother MFC-9460CDN - Page 553

7-29
Confidential
(39) Remove the three Taptite cup S M3x6 SR screws to remove the Main shield plate from
the Top drive ASSY.
Fig. 7-52
(40) Disconnect the Flat cable from the Develop FFC holder.
(41) Release the two Hooks to remove the Develop FFC holder from the Upper cable rack.
Fig. 7-53
Taptite cup S
Top drive ASSY
Main shield plate
Hook
M3x6 SR
Upper cable rack
Hook
Develop FFC holder
<Left side>
Hook