Brother MFC-9460CDN - Page 569

7-45
Confidential
(38) Remove the three Taptite cup S M3x6 SR screws to remove the Main shield plate from
the Top drive ASSY.
Fig. 7-82
(39) Disconnect the Flat cable from the Develop FFC holder.
(40) Release the two Hooks to remove the Develop FFC holder from the Upper cable rack.
Fig. 7-83
Taptite cup S
Top drive ASSY
Main shield plate
Hook
M3x6 SR
Upper cable rack
Hook
Develop FFC holder
<Left side>
Hook