Scanning (For USB cable users)
194
i Press a or b to choose the file size you want.
Press OK and go to step j.
j The file name is set automatically. However, you can create a name of your choice using the dial pad.
You can only change the first 6 digits of the file name.
Press OK.
Press Clear to delete the letters you entered.
k Press Black Start or Color Start to start scanning.
The LCD shows S canning. Keep Device in Slot. while reading the data. DO NOT unplug the
power cord or remove the USB Flash memory drive from the machine while it is reading the data. You could
lose your data or damage the USB Flash memory drive.
Changing the default file size 12
You can set your own default setting for the file size. For a higher quality scan, choose the large file size. For
a smaller file size, choose the small file size.
a Press Menu, 1, 8, 2.
b Press a or b to choose 1.Color or 2.Gray. Press OK.
c Press a or b to choose Middle, Large and Small. Press OK.
d Press Stop/Exit.
You cannot choose the file size when you scan a document in black and white. Black and white documents
will be stored in the TIFF file format and the data will not be compressed.
Changing the default resolution and file type 12
a Press Menu, 5, 2, 1.
b Press a or b to choose Color 100 dpi, Color 200 dpi, Color 300 dpi, Color 600 dpi,
Gray 100 dpi, Gray 200 dpi, Gray 300 dpi, B&W 200 dpi or B&W 200x100 dpi.
Press OK.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
