Brother MFC-9460CDN - Page 175

Menu and features
167
C
Level 1 Level 2 Level 3 Level 4 Options Descriptions
7.Network 1.TCP/IP
1.Boot Method — Auto*
Static
RARP
BOOTP
DHCP
Chooses the BOOT
method that best
suits your needs.
2.IP Address — [000-255]. [000-255].
[000-255]. [000-255]
Enter the IP address.
3.Subnet Mask — [000-255]. [000-255].
[000-255]. [000-255]
Enter the Subnet
mask.
4.Gateway — [000-255]. [000-255].
[000-255]. [000-255]
Enter the Gateway
address.
5.Node Name — BRNXXXXXXXXXXXX Enter the Node
name.
6.WINS Config — Auto*
Static
Chooses the WINS
configuration mode.
7.WINS Server — Primary
[000-255]. [000-255].
[000-255]. [000-255]
Secondary
[000-255]. [000-255].
[000-255]. [000-255]
Specifies the IP
address of the
primary or secondary
WINS server.
8.DNS Server — Primary
[000-255]. [000-255].
[000-255]. [000-255]
Secondary
[000-255]. [000-255].
[000-255]. [000-255]
Specifies the IP
address of the
primary or secondary
DNS server.
9.APIPA — On*
Off
Automatically
allocates the IP
address from the
link-local address
range.
0.IPv6 — On
Off*
Enable or Disable the
IPv6 protocol. If you
want to use the IPv6
protocol, visit
http://solutions.brother.com/
for more information.
See Network User's Guide.
The factory settings are shown in Bold with an asterisk.