Brother MFC-9460CDN - Tone or Pulse (Not Available in New Zealand)

Chapter 7
52
c Do one of the following:
 To delete the stored data, press 1.
 To exit without deleting the stored
data, press 2.
23.Address Book
Erase This Data?
a 1.Yes
b 2.No
Select ab or OK
d Press Stop/Exit.
Tone or Pulse (not available in
New Zealand) 7
If you have a Pulse dialling service, but need
to send Tone signals (for example, for
telephone banking), follow the instructions
below. If you have Touch Tone service, you
will not need this feature to send tone signals.
a Press Hook.
b Press # on the machine’s control panel.
Any digits dialled after this will send tone
signals.
When you hang up, the machine will
return to the Pulse dialling service.